
Audison 1000W Total Power 2-Channel A-Class Amplifier - THDUE
THDUE
Amplifier | 1000 W total power | 2 x 500 W @ 2ohm | A-class
Thesis amplifiers are born with the know-how and experience achieved with the HV venti, improved by the innovation of digital technology. The result is a perfect combination between the highest level of analog technology and the advanced features of the digital technology in one unique product. The precious synergy with Full DA HD technology takes the in-car listening experience to a new level of excellence; the synthesis of a unique know-how employed in mobile audio reproduction.TH due is a bridgeable stereo amplifier: a logical choice and natural partner for systems where versatility, power and quality are the main parameters. The ultimate stereo amplifier.
FEATURES
- Complementary differential circuitry with current mirror.
- Cascode A Class driver with inverted complementary triplet power stages.
- Integrated 24-bit / 192 kHz Hi-End DA converters.
- Compatibility with Audison Full DA HD technology and Hi-Res audio files listening certification.
- SPDIF and AD Link optical digital inputs that manage up to 8 digital channels on RJ-45 connector.
- Dual Mono Construction featuring four power supplies in Synchro-PWM configuration.
- Sensitivity control featuring 256 steps resistive switching for a resolution of 120 dB.
- Energy Saving, Hi-Current, Hi-AB Class, A Class presets selectable in real time.
- Digital control via integrated settings panel, DRC and PC Software.
- High quality crossover module supplied.
- Chassis extruded from solid aluminium and built using CNC machines.
TECHNOLOGIES

FULL DA HD
Pure digital signal transfer with a resolution up to 24 bit / 96 kHz

Hi-Res audio
According to the definition of HiRes audio provided by JAS (Japan Audio Society – jas-audio.or.jp), HV venti far exceed the above 40 kHz bandwith analog requirement, providing an astonishing 5 ÷ 75k Hz (@ -3 dB, 2 VRMS, 4 Ω).

DIGITAL INPUTS AND OUTPUTS
Innovation is at the heart of the state-of-the-art digital decoding section. The S/PDIF optical input allows direct connection to digital sources with the ability to re-launch the digital signal to other Thesis amplifiers through the AD Link (Audison DigitalLink) system. Each amplifier features 192 kHz/24 bit PCM D/A conversion through a very high quality converter.

BIAS CONTROL
Provides the selection of four possible presets: Energy Saving, Hi-Current, Hi-AB Class and full A Class operation.

REMOVABLE CROSSOVER
Inherited from the HV venti and making the most of TH’s extreme versatility, the complete crossover circuit of the TH amplifier is removable; a high-end sound quality solution.

DUAL MONO CONSTRUCTION
Four Synchro-PWM power supplies allow for a very fast transient current response and to create a Dual Mono configuration
AMPLIFIER TECH DATA | |
---|---|
Channels | 2 |
Class | A-Class |
Hi Level Input | No |
Low Level Input | Yes |
Digital Input | Yes |
Power supply voltage / fuse | 11 ÷ 15 VDC |
Idling current | 2 A |
Idling current when off | 0.04 mA |
Consumption @ 14.4 VDC, 2Ω, Max Musical Power | 105 A |
Remote OUT | 12 VDC (20 mA) |
Remote IN | 7 ÷ 15 VDC (1 mA) |
AMPLIFIER STAGE | |
Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power | Distortion - THD @ 1 kHz, 4 Ω; 90% Power: 0.02 % |
Bandwidth A | (-3 dB, 2 VRMS, 4 Ω): 5 ÷ 70k Hz |
S/N ratio A | (A weighed @1 V): 106 dBA |
Damping factor A | (1 kHz, 2 VRMS, 4 Ω): 100 |
Input sensitivity Pre-In | Pre-In sensitivity (two ranges): 0.3 ÷ 4.8 VRMS |
Pre In Impedance | 15 kΩ |
Total Power RMS | 1000 W |
Minimum load impedance | 2 Ch 1 Ch 1 Ω 2 Ω |
Output Power (RMS) @14.4 VDC, 1% THD | 2 Ch @ 4 Ω 300 W x 2 2 Ch @ 2 Ω 500 W x 2 2 Ch @ 1 Ω 750 W x 2 1 Ch @ 4 Ω 1000 W x 1 1 Ch @ 2 Ω 1500 W x 1 Dual Power Mode - A Class: 2 Ch @ 4 Ω 80 W x 2 |
Adjustable Crossover | No |
CEA SPECIFICATIONS | |
Output power @ 4Ω, 1% THD+N, 14.4 V | Output power @ 4Ω, 1% THD+N, 14.4 V: 300 W x 2 Ch |
SN ratio (ref. 1W output) | SN ratio (ref. 1W output): 80 dBA |
INPUTS | |
Input Type | PRE - S/PDIF (Max 192 kHz / 24 bit) Optical and AD Link |
Filters Outputs | PRE Bypass / AD Link |
Filter Pass A | Removable kit: (Hi-pass / Lo-pass / Bandpass 12/24dB) 32 steps 18 ÷ 7.5k Hz with 8 standard & 2 customizable modules |
OTHER | |
Fuse | 100 A |
Weight | 10.3 kg |